linux.or.id

Alhamdulillah akhirnya setelah sekian lama nyari dan ngoprex berbagai sumber, akhirnya berhasil juga gw terkoneksi internet di linux dengan pakai kartu MATRIX

exsa13:~# pppd call gprs
Press CTRL-C to close the connection at any stage!
defining PDP context...
AT
OK
ATH
OK
ATE1
OK
AT+CGDCONT=1,"IP","satelindogprs.com","",0,0
OK
waiting for connect...

ATD*99***1#
CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.

Serial connection established.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 ]
rcvd [LCP ConfNak id=0x1 ]
sent [LCP ConfReq id=0x2 ]
rcvd [LCP ConfAck id=0x2 ]
rcvd [LCP ConfReq id=0x3 ]
sent [LCP ConfRej id=0x3 ]
rcvd [LCP ConfReq id=0x5 ]
sent [LCP ConfNak id=0x5 ]
rcvd [LCP ConfReq id=0x7 ]
sent [LCP ConfAck id=0x7 ]
sent [PAP AuthReq id=0x1 user="exsa13" password=""]
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
sent [CCP ConfReq id=0x1 ]
sent [IPCP ConfReq id=0x1 ]
rcvd [LCP ProtRej id=0x8 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]

rcvd [IPCP ConfReq id=0x1 ]
sent [IPCP ConfNak id=0x1 ]
rcvd [IPCP ConfReq id=0x3 ]
sent [IPCP ConfAck id=0x3 ]
sent [IPCP ConfReq id=0x1 ]
rcvd [IPCP ConfNak id=0x1 ]
sent [IPCP ConfReq id=0x2 ]
rcvd [IPCP ConfAck id=0x2 ]
Cannot determine ethernet address for proxy ARP
local IP address 10.11.188.48
remote IP address 10.0.0.1
primary DNS address 202.152.162.66
Script /etc/ppp/ip-up started (pid 26537)
Script /etc/ppp/ip-up finished (pid 26537), status = 0x0

trus ngeping linux.or.id

exsa13:~# ping linux.or.id
PING linux.or.id (67.19.121.27) 56(84) bytes of data.
64 bytes from host-67-19-121-27.client.org (67.19.121.27): icmp_seq=9 ttl=51 time=4519 ms
64 bytes from host-67-19-121-27.client.org (67.19.121.27): icmp_seq=10 ttl=51 time=3638 ms
64 bytes from host-67-19-121-27.client.org (67.19.121.27): icmp_seq=13 ttl=51 time=1760 ms

selesai
press CTRL+C

Terminating on signal 2.
Script /etc/ppp/ip-down started (pid 26731)
sent [LCP TermReq id=0x3 "User request"]
rcvd [LCP TermAck id=0x3 "User request"]
Connection terminated.
Connect time 2.9 minutes.
Sent 2600 bytes, received 3397 bytes.

Sending break to the modem

PDP context detached
Serial link disconnected.
Waiting for 1 child processes...
script /etc/ppp/ip-down, pid 26731
Script /etc/ppp/ip-down finished (pid 26731), status = 0x1

berikut cara konfigurasinya

edit :
exsa13:~# vi /etc/modules.conf

tambahin:
option ppp_async flag_time=0

trus buat file gprs, gprs-connect-chat dan gprs-disconnect-chat (ada di bawah)
pakai text editr,misalnya vi /etc/ppp/peers/gprs
trus pastekan script gprs yg ada dibawah, trus
save di /etc/ppp/peers/
dan seterusnya.......

kemudian
chown root:root /etc/ppp/peers/gprs*
chmod u+rwx,g=rx,o=rx /etc/ppp/peers/gprs-connect-chat
chmod u+rwx,g=rx,o=rx /etc/ppp/peers/gprs-disconnect-chat

kemudian exekusi :)

exsa13:~# pppd call gprs

beres :)

spek gw :
HP : Siemens ME45
Kabel data serial COM1
tested at Linux Xandros, FC2, RH9
Kartu GSM : MATRIX

========================= filename=gprs ========================================
lcp-echo-failure 0
lcp-echo-interval 0
nodetach
debug
show-password

# Connect script:
# scripts to initialize the GPRS modem and start the connection,
# wvdial command is for Orange SPV while other phones should work with chat
connect /etc/ppp/peers/gprs-connect-chat
#connect "/usr/bin/wvdial --chat --config /etc/ppp/peers/gprs-wvdial.conf radiolinja_usb_orange_spv"

# Disconnect script:
# AT commands used to 'hangup' the GPRS connection.
disconnect /etc/ppp/peers/gprs-disconnect-chat

# Serial device to which the GPRS phone is connected:
# /dev/ttyS0 for serial port (COM1 in Windows),
# /dev/ircomm0 for IrDA,
# /dev/ttyUB0 for Bluetooth (Bluez with rfcomm running) and
# /dev/ttyUSB0 for USB
/dev/ttyS0 # serial port one
#/dev/ttyS1 # serial port two
#/dev/ircomm0 # IrDA serial port one
#/dev/rfcomm0 # Bluetooth serial port one
#/dev/ttyUSB0 # USB serial device, for example Orange SPV

# Serial port line speed
115200 # fast enough
#57600 # perhaps usefull with IrDA as some phones don't like
# speeds higher than this

# Hardware flow control:
# Use hardware flow control with cable, Bluetooth and USB but not with IrDA.
crtscts # serial cable, Bluetooth and USB, on some occations with IrDA too
#nocrtscts # IrDA

local
:10.0.0.1
noipdefault
ipcp-accept-local
defaultroute
usepeerdns
novj
nobsdcomp
novjccomp
nopcomp
noaccomp
noauth
=========================== end file = gprs ==========================================

======================= filename = gprs-connect-chat =================================
#!/bin/sh
exec chat \
TIMEOUT 5 \
ECHO ON \
ABORT '\nBUSY\r' \
ABORT '\nERROR\r' \
ABORT '\nNO ANSWER\r' \
ABORT '\nNO CARRIER\r' \
ABORT '\nNO DIALTONE\r' \
ABORT '\nRINGING\r\n\r\nRINGING\r' \
'' \rAT \
TIMEOUT 12 \
SAY "Press CTRL-C to close the connection at any stage!" \
SAY "\ndefining PDP context...\n" \
OK ATH \
OK ATE1 \
OK 'AT+CGDCONT=1,"IP","satelindogprs.com","",0,0' \
OK ATD*99***1# \
TIMEOUT 22 \
SAY "\nwaiting for connect...\n" \
CONNECT "" \
SAY "\nConnected." \
SAY "\nIf the following ppp negotiations fail,\n" \
SAY "try restarting the phone.\n"

================================== end file = gprs-connect-chat ===============================

=================================== filename = gprs-disconnect-chat ===========================
#!/bin/sh
# send break
exec /usr/sbin/chat -V -s -S \
ABORT "BUSY" \
ABORT "ERROR" \
ABORT "NO DIALTONE" \
SAY "\nSending break to the modem\n" \
"" "\K" \
"" "\K" \
"" "\K" \
"" "+++ATH" \
"" "+++ATH" \
"" "+++ATH" \
SAY "\nPDP context detached\n"
=============================== end file = gprs-disconnect-chat ===============================

semoga berguna